3.2.
Manually Set ISP
If you cannot find the ISP from the wizard, please follow the procedures below to
set the ISP settings manually.
Before configuring the ISP manually, please check with your ISP (Internet
Service Provider) what kind of the service is provided such as PPPoE, PPPoA or
RFC1483/2684. Gather the information as illustrated in the following table and
keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
1. Please select "Other".
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service Name).
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password.
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP Address,
Subnet Mask, Gateway Address, and Domain Name
System (DNS) IP Address (It is a fixed IP Address).
13