Table of Contents
Advertisement
Selecting the operating position:
■ Press the Release button and move
the swivel arm. Support movement with
your hand.
■ Move the swivel arm until it engages in
the required position.
Position
Drive
1
7
2
7
3
6
9
4
7
Insert / remove whisk, stirrer or kneading
hook. Add large quantities of ingredients
Tool /
Operating
Accessory
speed
1-5
1-7
1-3
*
–
3-7
3-5
5-7
5-7
Operation
W Risk of injury!
Do not insert mains plug until all
preparations for working with the appliance
are complete.
Attention!
Do not operate the appliance without an
accessory / tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave-safe.
■ Before operating the appliance
and accessories for the first time,
clean thoroughly; see "Cleaning and
servicing".
Important information
These operating instructions contain a sticker
with reference values for the operating speed
of the appliance when using the tools or
accessories. We recommend attaching this
sticker to the appliance (Fig. C).
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Pull out cable to the required length
(Fig. D).
Warning!
Do not twist the cord when inserting it.
■ Insert the mains plug.
Bowl and tools
W Risk of injury from rotating tools
While the appliance is operating, never place
fingers in the mixing bowl. Attach the cover
(12) before operating the appliance! Do not
change tools until the drive has come to a
standstill – when the appliance is switched
off, the drive continues running briefly and
stops in the tool change position. Do not
move the swivel arm until the tool has come
to a standstill.
Always secure unused drives with
protective drive covers.
Attention!
Use bowl with this appliance only.
Operation
en
17
Advertisement
Chapters
Table of Contents
