Operation With Blades - Echo SRM-2620U Operator's Manual

SRM-2620U
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.

Operation With Blades

Blade use DEMANDS specific Brush Cutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
PARTS REQUIRED FOR THESE BLADES:
Pro Maxi-Cut
Grass/Weed
Blade
Support Handle, w/
or
w/o Barrier Bar
Shield w/cutoff knife
Harness
Upper Plate &
Flat Washer
Hex Nut
New Cotter Pin
X7502341900
© 10/2016 ECHO Inc.
Rigid Plastic
Tri-Cut
Grass/Weed Blade
U-Handle or Support
Handle
w/Barrier Bar
Shield w/cutoff knife
Harness
Upper Plate
& Glide Cup
Hex Nut
New Cotter Pin
OPERATION
Metal Blade
U-Handle or Support
Handle
w/Barrier Bar
Shield w/o cutoff
knife
Harness
Upper/Lower
Blade Plates
Hex Nut
New Cotter Pin
25