Echo SRM-2620U Operator's Manual page 43

SRM-2620U
3. Insert one end of trimmer line
into an eyelet, and push line
equal distance through trimmer
head.
4. Hold trimmer head while turning
knob clockwise to wind line onto
spool until about 13 cm (5 in.) of
each line remains exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators located at the bottom of the Speed-Feed®
head are worn smooth, or if holes appear, replacement of the cover
or the entire Speed-Feed® head is required.
X7502341900
© 10/2016 ECHO Inc.
MAINTENANCE
Wear Indicators
43