Advertisement
1. Connect the set to TV Monitor.
2. Turn on the POWER.
3. Press both CH UP button on the set and the FF button on the set
for more than 2 seconds.
ADDRESS and DATA will appear on TV Monitor as
4. ADDRESS is now selected and should "blink". Using the SET + or -
button on the remote, step through the ADDRESS until required
ADDRESS to be changed is reached.
5. Press ENTER to select DATA. When DATA is selected, it will
"blink".
6. Again, step through the DATA using SET + or - button until
required DATA value has been selected.
7. Pressing ENTER will take you back to ADDRESS for further
selection if necessary.
8. Repeat steps 4 to 7 until all data has been checked.
9. When satisfied correct DATA has been entered, turn POWER off
(return to STANDBY MODE) to finish DATA input.
After the data input, set to the initializing of shipping.
10. Turn POWER on.
Fig. 1
32
Fig. 1
.
Advertisement
