Advertisement
9.2.12. FE HEAD (RECORDER ONLY) (Refer to
1. Remove the screw
2. Remove the FE Head.
9.2.13. AHC ASS'Y/CYLINDER UNIT ASS'Y (Refer to
1. Unlock the support
2. Disconnect the following connector: (CD2001)
3. Remove the 3 screws
4. Remove the Cylinder Unit Ass'y.
NOTE
1. When you install the Cylinder Unit Ass'y, tighten the screws from
(1) to (3) in order while pulling the Ass'y toward the left front
direction.
9.2.14. CAPSTAN DD UNIT (Refer to
.
Fig. 2-12
and remove the AHC Ass'y.
.
Fig. 2-13
Fig. 2-14-A
19
Fig. 2-12
)
Fig. 2-13
)
)
Advertisement
