Table of Contents
Advertisement
Section 2
Getting Started
3.
M
ENU STRUCTURE
Main menu (use the number keys for direct access to the menu options)
1. Installation
1. Languages
2. Antenna installation -
2. User data
1. System setup
2. Channels
3. Preferences
4. Maintenance
3. Information
1. Check signal
2. About EchoStar
4.
A
NTENNA MYTHS
Initially, if you use an analog antenna now, often there is no need to buy a new antenna. However, if the current antenna or it's cabling is in poor
condition which results in unsatisfactorily reception, you could improve this with a new antenna suitable for digital terrestrial reception.
You can receive excellent digital TV and Radio:
■
if the service provider delivers enough signal (level and quality) to your area;
■
If the indoor or outdoor antenna is healthy (antenna is clean, in good condition and correctly aimed);
■
if the connection between the antenna and TV set is healthy (good quality cable, 75 ohm, no sharp bends or kinks, metal connectors);
You can, in certain situations, improve the digital TV and Radio reception:
■
if you use an outdoor antenna, which is not obstructed by the metalwork that is used in the building construction,
■
if you use an active antenna for situations where you have a long cable between the antenna and the receiver.
Page 2 - 2
-
To set the language you want to use for menu, audio and subtitle.
To aim the antenna with help of the build-in signal indicator.
1. Search channels
To start an automatic search for new channels.
2. Search mux
To start a manual search for new channels on a specific service.
3. Edit mux
To edit a service for new settings as indicated by the operator.
1. Setup favorites
To add or remove channels from the all list into a favorite list.
2. Edit channels
To edit or set a parental lock onto a specific channel.
1. Local time
To set the local time.
2. Timers
To program a timer.
3. Change PIN-code
To change the PIN-code as used in the parental control.
4. TV system
To select TV related settings (e.g. Aspect ratio, Parental control, transparency).
5. Sleep timer
To set a sleep timer to set the receiver automatically to standby.
1. Color settings
To make a color selection for the menus.
2. Factory reset
To delete all settings and start with the Guided setup.
3. Delete channels
To delete all channels from the channel and favorite lists.
4. Region code
To tell the receiver which regional settings to use.
-
To check the signal for signal quality and signal level.
-
To view the receiver's and EchoStar's administrative data.
User Guide
EchoStar International Corporation
Advertisement
Table of Contents
