EchoStar Terrestrial User Interface
P
- L
REFERENCES
OCAL TIME
■
Clock mode
To select internal or GMT-supported clock.
■
Time zone*
To select the city closest to you.
■
GMT*
Shows the time-offset as a result of the time
zone selection.
■
Time*
To set the current time.
■
Date*
To set the current Date.
■
Local time
The Local time is shown automatically with the
settings made before and offer you a possibility
to check for the correct time.
■
Local date
The Local date is shown automatically with the
settings made before and offer you a possibility
to check for the correct date.
■
Daylight saving*
To set the summer time (if applicable to your
region).
* Availability depends on the selection as made in for the Clock mode.
NOTE
The time shown in the Local time field offers you a possibility to check
for the correct time. EPG and timers will not operate correctly if the
Local time not set correctly.
P
- T
REFERENCES
IMERS
■
Timer
To select the timer that you want to program.
■
Channel
To select the channel that you want to record
from.
■
Interval
To set the timer, once or repeat for every
occurrence.
■
Date
To set the start date for the timer.
■
Start
To set the start time for the timer.
■
Duration
To set the length for the timer.
www.echostar-int.com
Description and Operation
P
- C
PIN-
REFERENCES
HANGE
■
PIN-code
To type in the factory default (0000) or your
personal PIN-code.
(Current, New,
Verify)
P
- TV-
REFERENCES
SYSTEM
■
Aspect ratio
To set the image size for the TV.
If you have a TV with a 4:3 screen size and the
transmission is in 16:9 format, you can select
either 4:3 or 16:9.
4:3 shows the full screen completely where some
of the image sides is cut off, 16:9 will show the
full image with black top and bottom banners.
■
Video standard1
To set the video format supported by your TV
(50Hz).
■
Video standard2
To set the video format supported by your TV
(60Hz).
■
InfoBanner
When you change to another channel, the
InfoBanner shows momentarily. With this option
time out
you can set the view time for the InfoBanner.
■
Menu animation
To set the menu transition effect.
■
Installation lock
To lock the Installation and User data menu for
unauthorized users. Note that the Installation
lock comes on automatically after you have set a
channel lock.
■
Receiver lock
To lock the receiver completely for unauthorized
users. If you select On, you only can gain access
with the PIN-code after you have set the receiver
to standby.
■
Local channel
To select the channel order as transmitted by the
service provider or select your own order.
number
■
Transparency
To set the menu transparency level.
P
- S
REFERENCES
LEEP TIMER
■
Duration
To set the length for the timer. Note that the
receiver switches to standby after the sleep timer
has run out.
Section 3
CODE
Page 3 - 7