Table of Contents
Advertisement
4. Lifting Method
• When carrying the suspended, unit pass the ropes between legs of base panel under the unit.
• Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
• Attach the ropes to the unit at an angle of 40° or less.
• Use only accessories and parts which are of the designated specification when installing.
Air outlet grille
Always hold the unit by the corners, as holding
it by the side intake holes on the casing may
cause them to deform.
CAUTION
Be very careful while carrying the product.
- Do not have only one person carry product if it is more than 20 kg.
- PP bands are used to pack some products. Do not use them as a mean for transportation because they are
dangerous.
- Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your hands.
- Tear plastic packaging bag and scrap it so that children cannot play with it Otherwise plastic packaging bag
may suffocate children to death.
- When carrying in Outdoor Unit, be sure to support it at four points. Carrying in and lifting with 3-point support
may make Outdoor Unit unstable, resulting in a fall.
8 _
R410A(50/60Hz)
Intake hole
Corner
Handle
Sub line
A
40° or less
WARNING
Advertisement
Table of Contents
