5.2.2 Application Settings
1. From the Installer Menu, select 3. Application Settings.
2. After entering the application setting screen, select 3. Air handler Unit, and
then press the Up button (
the parameters or to increase or decrease setting values. Press the OK Button
(
) to select a parameter or to confirm after making changes.
Item
1. AHU Burn Delay Time
2. AHU Pump Post Purge Time
3. AHU Outdoor Low Temp
4. AHU Outdoor High Temp
5. AHU SH MIN Set-Point
6. AHU SH MAX Set-Point
7. AHU 2Stage T/S Output
26
Parameter Table
) or the Down button (
Default value
30 Sec
30 Sec
14℉
70℉
100℉
100℉
25.00%
) to switch between