Table of Contents
Advertisement
5. Operation and Menu Program
Main Menu
Press MENU to display the Main Menu on the screen.
Select a sub-menu using the ÙÚ keys or the numeric keys. Pl
ease note that OK is always a confirmation of your selection. T
o go back to the previous menu, press MENU.
Installation
Main Menu
1. TV Channels
2. Radio Channels
3. Parental Control
4. Edit & Erase
5. Installation
6. Select Satellite
7. Common Interface
The installation, enter your code Menu is displayed only when the Installation Lock is set as [ON].
The initial code is set as [0000] but you can change it (see change code on page 15).
1) LNB Setting
Select in the Installation Menu "LNB Settings",
using the ÙÚ keys.
Select the appropriate Satellite using the × Ø
keys and press STORE.
As shown at the right, ASTRA1 is selected.
By default a Universal LNB has been chosen but
you can change this manually (by using the cursor
keys) to select from a range of 7 other DRO
Frequencies.
Other parameter values are changed
automatically according to your satellite
selection. Press OK to confirm your selection.
If you have a mechanical polarizer on your LNB, you have to set the "Polarity Control" parameter in this
menu to [Skew].
If you select "Global" in the " LNB Installation" parameter, values of the parameters in this menu are saved
for all other satellites as well.
Installation Lock
Enter PIN code
[ ? ? ? ? ]
[0000]
LNB SETTING
Satellite
LNB Freq. Low
LNB Freq. High
Switch Type
Switch Port
Polarity Control
LNB Freq. Band Control
Ku/C Control
0/22kHz Control
0/12V Control
LNB Power
To return to the previous Menu, press MENU
9
Main Menu
1. TV Channels
2. Radio Channels
3. Parental Control
4. Edit & Erase
5. Installation
6. Select Satellite
7. Common Interface
Installation
1. LNB Setting
2. Ant Setting/Auto Search
3. SMATV Configuration
4. Language Setting
5. Local Time Setting
6. A/V Output Setting
7. User's Setting
?
ASTRA 1 ?
Universal
Universal
Disable
Disable
Skew
13/18V
0/22kHz
Off
Off
On
Advertisement
Table of Contents
