Table of Contents
Advertisement
3) SMATV Configuration
<Concepts>
A Satellite Master Antenna Television (SMATV) system
which is intended for the distribution of television and
sound signals to household in one or
6 more adjacent buildings.
A SMATV System represents a means for sharing
the same resources among several users for satellite and
terrestrial reception, and it is designed to perform
the adaptation of the satellite TV signals to the SMATV
channel characteristics.
This receiver has a SMAT-IF facility to operate this SMATV.
This configuration allows the direct distribution of the QPSK signal received from the satellite
to the SMATV-IF distribution network in the extended IF band (above 950MHz).
Before you start, you have to check your condition whether it is possible to use this facility or not in your ho
useholds. (You can ask your household supervisor.)
<Operation>
If this receiver is connected to a SMATV network, select "SMATV Configuration".
The most common alternatives for "Symbol rate" and "FEC" are already preprogrammed.
(When you need to change the "Symbol rate" for the exceptional frequency, select as you know.)
Move to "Start Auto Search" and just press OK.
Then, the "Auto Search" procedure will start.
To cancel the processing while the "Auto Search" is proceeding, press MENU key.
4) Language Setting
You can select the desired language for the OSG (on-sc
reen graphic) menu display using volume up/down keys
(×, Ø) in "Menu Language" parameter.
Also, you can select a different audio channel in the Au
dio Language parameters.
This is a benefit if different languages are transmitted a
nd you prefer to listen to one of these other languages.
SMATV Configuration
Symbol rate alternative 1
Symbol rate alternative 2
Symbol rate alternative 3
FEC
Start Auto Search
To return to the previous Menu, press MENU
Language Setting
Menu Language
Main Audio Language
2nd Audio Language
To return to the previous Menu, press MENU
11
27500
?
?
?
?
Auto
?
?
English
English
English
Advertisement
Table of Contents
