EchoStar DSB-1000 2Ci User Manual page 11

Digital satellite receiver with common interface
Table of Contents

Advertisement

2) Ant Setting / Auto Search
Refer to the blue "Signal Quality bar at the bottom of t
he screen. It is recommended that the signal is at the
medium level or higher.
If it is not , please adjust your satellite dish.
This menu is to align your dish to the selected satellite.
If you set the "Polarity Control" parameter in the "LNB
Setting" menu as [Skew], you can adjust the "Skew" pa
rameter in this menu while you are watching the signal l
evel at the same time.
Auto Channel Search
Searches the satellite selected for TV channels and
Radio channels, which are then stored and shown on
the screen.
TV channels are shown on the left.
Radio channels are shown on the right.
Note) Do not press POWER (
or receiver while doing Auto
Channel Search. All other keys of the
remote will not work during searching.
Auto Search
) on the remote
Channel Searching Status
0%
10
Ant Setting/Auto Search
Satellite
Transponder Freq.
LNB Polarization
Symbol Rate
Skew
Start Auto Search
Signal Quality
Poor
No or Bad Signal
To return to the previous Menu, press MENU
TV Channels
153. ARTE
154. CARSAT
155. Beta BC
156. BD1
157. TAQUILLA 6
158. TAQUILLA 7
159. TAQUILLA 8
160. ESTILO
ASTRA 1
?
12722
Horizontal
22000
Not set
Medium
ASTRA 1
Radio Channels
41. MUSICALS
42. REQQAE
43. COUNTRY
44. NEW CNTRY
45. LATIN
46. KL. SYMPHON
47. KLASSIK
48. OPER
50%
?
Good
100%

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsb1000-2ci

Table of Contents