Table of Contents
Advertisement
Program Satellites
The EchoStar D-2510IP VIACCESS now has
programmed the position of all selected satellites.
The next step is to store all channels on these
satellites. To do this press the MENU key, select
the Installation option followed by the Program
Satellites option. Use the key to select the next
satellite and press the OK key. The dish will
move to the selected satellite.
Select Start Search to store all channels.
Repeat this procedure for all satellites.
Motorized Dish Setting
If you are not satisfied with the Limit parameters e.g. since the
mechanical limits might not be set properly, you can erase the
position data and start again after adjusting the mechanical
limits at the dish.
Fixed Dish
If you want a fixed dish and an actuated dish, you can set
in this menu the "Fixed dish".
Start with selecting the appropriate satellite and LNB Type
and press the RED key twice.
To make a satellite again actuated, change the LNB Type
to the actuated LNB type and press the RED key twice.
Erase Position Data
If you want to erase all the position data, select "Erase Posit
ion Data" and press the RED key twice.
Program Satellites
1
2
3
4
5
6
7
8
EL
Signal Level
Signal Quality
Motorized Dish Setting
i
Motorized Dish Setting
15
Satellite
013.0? E
LNB Type
TP/Pol/SR(Digital)
11662/V/27500
Skew
Position
E
Re-align Dish
Search Type
Start Search (Press OK)
[E 1070 W]
1
Antenna Installation
2
Fixed dish
3
Erase Position Data
Fixed dish
1
Select Satellite
2
LNB Type
i
Fixed
Cancel
1
Antenna Installation
2
Fixed Dish
3
Erase Position Data
i
Delete
Cancel
× HOTBIRD Ø
Type 1
Not set
1070
W
+00
Auto Search
WL
10%
5%
Exit
× ASTRA1 Ø
Type 1
LNB set
Exit
Exit
Advertisement
Table of Contents
