EchoStar D-2510 IP Viaccess User Manual page 14

Digital, positioner receiver with embedded viaccess and common interface
Table of Contents

Advertisement

Antenna Installation
First the east and west limits have to be set before
any satellites can be programmed.
Press the key on the "East Limit" parameter line.
The initial value of 5000 will decrease as the dish i
s moved. Keep moving the dish unit until the east li
mit is reached. If the dish moves to the west when
you press the key, reverse the motor wires.
If either the numeric value is not shown or the message
"...Motor Error..." is displayed on the lower part of the s
creen, then ;
1) an error occurred when moving the dish(which could be caused by e.g. loose wires), or
2) the dish has reached its east limit. In this case continue with the installation procedure.
Move the dish a few counts to the west by pressing the key and press the OK key to store east limit in this p
osition. The indicated number will be set at 1000 and the highlight will be moved down to the "West Limit" li
ne. Now set the west limit by moving the dish using the key until you have reached the dish limit. The indica
ted number will increase from 1000. Move the dish back a couple of counts using the key and press the OK
key to store the west limit.
The dish limits are now stored in the receiver and t
he dish is in the most western position. Press the S
AT key to start the "Auto Sat" function or you can
press MENU to program the satellites manually.
If you do not have a moveable dish, just press the
OK key twice to program the east and west limit in
the same position. This will be indicated by a
numeric value of 1000 for both limits.
Auto SAT
Now press the or key to select the most western
position you can receive.
Press the OK key.
Select the Position option and move the dish using
the key to correct location of the western satellite.
Peak the dish to obtain the highest signal quality
using the and keys. Then press the OK key to
store this setting.
Antenna Installation
1
2
i
Antenna Installation
1
2
i
Press SAT to go to the Auto SAT feature.
Press menu if you want to program the satellites manually.
Press Exit to return to TV/Radio channel.
Please Store most western satellite
1
2
3
4
5
6
7
8
8
EL
13
×
East Limit
Not Se t
West Limit
Not Set
East Limit
West Limit
×
Satellite
018.0° W
INTEL705
LNB Type
Type1
TP/Polar/SR(Digital)
11525/H/12225
Skew
Not set
Position
E
1000
Re-align dish
Search type
Auto Search
Start Search(Press OK)
Signal Level
Signal Quality
Ø
Exit
1000
1070
Exit
Ø
W
+00
WL
11%
00%

Advertisement

Table of Contents
loading

Table of Contents