Table of Contents
Advertisement
Chapter 2 Preparations
1.15
Optical Disk Drive
This section describes the procedure for installing the optional optical disk drive.
Installation
1.15.1
Install an optical disk drive in the following procedure.
1.
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the two screws from the optical
disk drive bay, and pull the bay out.
3.
Remove a single screw from the bay you
have removed in Step 2, and remove the
bracket.
4.
Remove the dummy cover.
Important
Do not install any unsupported optical disk drive.
Note
Keep the removed screws and dummy cover for future use.
Express5800/R120d-1M User's Guide
1. Installing Internal Optional Devices
Optical disk drive bay
Screw
87
Advertisement
Table of Contents
