Table of Contents
Advertisement
Chapter 2 Preparations
13. Make sure that the heat sink is installed on a level with the motherboard.
14. Install an additional fan unit provided with additional CPU board. Remove fan cover from the slot
where you are going to install an additional fan.
15. Remove a single screw from the tray, and remove the battery tray for RAID Controller.
56
Note
Make sure the location to put the heat sink.
Note
• If the heat sink is not level, remove it, and then install it again.
The following probably causes the heat sink not to be level:
– The CPU is not positioned correctly.
– All screws are not completely tightened.
• Do not move the secured heat sink.
Express5800/R120d-1M User's Guide
REAR
FRONT
1. Installing Internal Optional Devices
Advertisement
Table of Contents
