Table of Contents
Advertisement
Chapter 2 Preparations
Installing/Removing the Server
(1)
Installation
Mount the server to a rack in the following procedure.
1.
Pull the slide rail from the outer rail that is
mounted on rack until the slide rail is locked.
2.
With two or more persons, firmly hold the
server and mount it to the rack.
106
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
• Do not attempt to lift the server with single person.
• Do not drop.
• Do not leave the server being pulled out.
• Do not install with the cover removed.
• Do not get your fingers caught.
Important
Always install the server with two or more persons.
Note
Make sure that locking mechanism work normally.
Express5800/R120d-1M User's Guide
CAUTION
Locked state
Locking mechanism
2. Installation and Connection
Advertisement
Table of Contents
