Specifications - Honeywell Notifier RP-2001 Instruction Manual

Specifications

• Indicators

Fire Alarm

Supervisory
 Trouble

AC Power

Alarm Silenced

Discharge
• Piezo sounder for alarm, trouble and supervisory
• 24 volt operation
• Low AC voltage sense
• Outputs Programmable for:

Releasing Solenoids

NACs programmable for:
• Designed for sprinkler standards NFPA 13, 15 and 16
• Disable/Enable control per input zone and output zone
• Extensive transient protection
• Dual hazard operation
• Adjustable waterflow discharge timer and two soak timers
• Cross-zone (double-interlock) capability
• Pre-programmed and custom application templates
• Automatic battery charger with charger supervision
• Silent or audible walktest capabilities
• Optional Dress Panel DP-51050 (red)
• A modified Dress Panel is provided standard with Canadian models: includes an N-ANN-LED
Annunciator module
• Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet
• Optional N-CAC-5X Class A Converter Module for Outputs and IDCs
• Optional 4XTM Municipal Box Transmitter Module
• Optional Digital Alarm Communicators (411, 411UD, 411UDAC)
• Optional ANN-SEC card for secondary ANN-BUS
1.2 Specifications
AC Power
RP-2001/C: 120 VAC, 60 Hz, 3.66 amps
RP-2001E: 240 VAC, 50/60 Hz, 2.085 amps
Wire size: minimum #14 AWG (2.0 mm
Supervised, nonpower-limited
RP-2001 Series Manual — P/N 52985:D5 1/26/2017
– Silence Inhibit
– Auto-Silence
– Strobe Synchronization (System Sensor, Wheelock, Gentex, Faraday, Amseco)
– Selective Silence (horn-strobe mute)
– Temporal or Steady Signal
– Silenceable or Nonsilenceable
– Release Stage Sounder
2 ) with 600V insulation
Product Description
13