Common Procedures; Trigger Lock; Prime/Spray Valve; Pressure Relief Procedure - Graco 3A2589F Operation, Repair, And Parts

Common Procedures

Trigger Lock

Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
ti18866a
Trigger Locked
Trigger Unlocked
(red ring is visible)

Prime/Spray Valve

ti16700a
UP position
ti14999a
(For priming and releasing
pump pressure)
8
ti14995a
ti18874a
ti16701a
DOWN position
(Ready to spray)
Follow the Pressure Relief Procedure
whenever you see this symbol.

Pressure Relief Procedure

Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the discharge. For
example, do not try to stop the paint flow with any part
of the body.
This sprayer builds up an internal pressure of 2000 psi
(14 MPa, 138 bar) during use. Remove battery and fol-
low this Pressure Relief Procedure whenever you
stop spraying and before cleaning, checking, servicing,
or transporting equipment to prevent serious injury.
1. Engage trigger lock.
ti18866a
2. Put prime/spray valve UP to release pressure.
ti16700a
Common Procedures
ti14994a
ti14999a
3A2589F