Jensen CAR689 Installation & Owner's Manual page 22

CAR689 OPERATION
Bluetooth - Handsfree Operation
1
Top 3
1
Sources
Home
Source
Menu
Preparation
Pairing a New
Connecting a
Paired Device
Bluetooth Phone
Signal Strength
Keypad
Contacts
Recent Calls
22
2
Before you can use a Bluetooth device, it must be
paired and connected. Make sure that Bluetooth
is activated on your device before you begin the
pairing process.
The unit broadcasts the pairing signal constantly
when no devices are currently connected. Complete
Device
the pairing sequence from your Bluetooth device.
Refer to the owner's manual for your device for
more details. The device name is "JENSENBT". The
unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to
be done more than once.
Most Bluetooth devices support the auto-connect
feature and will connect automatically if the device
is in range when the unit is powered-on. If your
device was previously paired but does not connect,
enter the Bluetooth setup menu and turn Auto
Connect on.
To access the phone, select Bluetooth Phone from
the Main Menu or from any operational mode.
Displays the strength of the current signal.
1
Press to display the keypad.
2
Press to display stored contacts. Press any contact
3
to dial that number.
Press to display a list of recent calls. Press any
4
number to dial.
3 4 5