Table of Contents
Advertisement
Deactivating the security function
If you want to deactivate the security function of the drive, follow the steps.
1
Connect the drive to the computer and touch the wireless
key receiver with the wireless key to unlock.
2
Turn the drive bottom side up and open the lid, then press
the CANCEL button.
The LOCK and UNLOCK indicator flashes alternately for one second,
then the UNLOCK indicator lights.
The security function is deactivated. When you connect the drive to the
computer using the USB cable next time, you can use the hard disk drive
without the wireless key.
z
Tip
If you want to use the security function again, you must register the wireless keys again
(page 14).
Note
If you leave the hard disk drive unattended when the security is deactivated, not only is
your data unguarded, but someone could also register other wireless keys (not yours) to
the hard disk drive. It is recommended that you enable the security function whenever you
leave the hard disc drive unattended.
17
Advertisement
Table of Contents
