Deactivating The Security Function - Sony VGP-UHDP04 Operating Instructions Manual

Deactivating the security function

If you want to deactivate the security function of the drive, follow the steps.
1
2
The security function is deactivated. When you connect the drive to the
computer using the USB cable next time, you can use the hard disk drive
without the wireless key.
z
Tip
If you want to use the security function again, you must register the wireless keys again
(page 12).
Notes
• If you leave the hard disk drive unattended when the security is deactivated, not only is
your data unguarded, but someone could also register other wireless keys (not yours) to
the hard disk drive. It is recommended that you enable the security function whenever
you leave the hard disc drive unattended.
• Even if you press the CANCEL button while the ACCESS indicator is flashing, the
security is not deactivated. Be sure that the ACCESS indicator goes out before pressing
the CANCEL button.
01GB02C01_UHDM04.p65
Black
Connect the drive to the computer and touch the wireless
key receiver with the wireless key to unlock.
Press the CANCEL button using a pointed object, such as
ball-point pen.
The LOCK and UNLOCK indicator flashes alternately for one second,
then the UNLOCK indicator lights.
15
15
05.10.31, 2:27 PM