Table of Contents
Advertisement
1.6 DISASSEMBLY/ASSEMBLY OF THE
ASSEMBLY
@
1.6.1
Monitor Assembly and Hinge Assembly
Note:
• Before proceeding to the work, separate the Monitor As-
sembly from the Upper Case Assembly as required.
1. Remove the four screws (1 to 4), disengage the four
hooks (L@a to L@d) in order, and take out the Monitor
Cover Assembly.
2. Unlock the connector ( @a ) and, while lifting the Hinge
Assembly, unplug and take out the FPC.
3. Remove the screw (5) and take out the bracket (MONI-
TOR CASE).
4. Unplug the FPC from the connector ( @b ) and take out
the Monitor Board Assembly and the backlight.
5. Remove the LCD module by disengaging the five hooks
(L@e to L@j).
6. Remove the two screws (6, 7) and take out the hinge
covers (U, L) by disengaging the four hooks (L@k, L@l)
at both sides of each of the hinge covers.
7. Remove the FPC Assembly from the Hinge Assembly.
NOTE
12
e,g
FPC ASSY
HINGE
ASSY
NOTE
12
f
MARKING
12
NOTE
d
WIRE
1-10
@
MONITOR
∗
1
(S
12
CN
HINGE COVER (L)
6
(S
12
d)
7
(S
12
NOTE
12
c,e
NOTE
FPC ASSY
HINGE ASSY
MAGNETS
NOTE 12 f
(L
12
k)
(L
12
l)
HINGE COVER (U)
(L
∗ : 0.118 N
m (1.2kgf
cm)
•
•
Fig. 1-6-1
@
a: Be careful not to damage the FPC or the connec-
Note
tor when removing the Monitor Cover Assembly.
@
Note
b: Be careful not to damage the parts when remov-
ing or mounting the Hinge Assembly.
@
Note
c: To unplug the FPC, release only the lock of the
connector and remove the FPC together with the
Hinge Assembly.
@
Note
d: As the backlight is soldered at two points on the
Monitor Board Assembly, the solder should be re-
moved when disassembling the backlight as a sin-
gle part.
@
Note
e: Take care when handling the FPC.
@
Note
f: Be careful not to lose the magnets and attach
them in the correct orientation.
@
Note
g: When mounting the FPC Assembly, wrap it around
the Hinge Assembly by 3-1/2 turns.
(L
12
d)
(L
12
a)
a
∗
a)
(L
12
b)
2
(S
12
a)
3
12
(S
12
a
CN
12
b
NOTE
12
d
BACK LIGHT
d)
LCD MODULE
12
b
MONITOR CASE ASSY
(L
12
g)
12
(L
h)
12
j)
(L
12
(L
12
f)
NOTE
12
a
MONITOR COVER ASSY
4
(L
12
c)
(S
12
b)
b)
MONITOR BOARD ASSY
BRACKET
(MONI CASE)
5
(S
12
c)
e)
Advertisement
Table of Contents
