Installing and removing the batteries
•
If the cover latch is closed, open it (page 16).
Installing the batteries
1.
Insert the tabs at the battery's terminal side into the notches of the unit (A), and then lower the battery
into place (B).
FZ-VZSUT10
2.
Press down firmly on the outside edges of the battery to seal it closed.
FZ-VZSUT10
3.
Close the cover latch (A) and lock it (B) by sliding the switch (circled in the illustration) toward
•
If the gap above the latch or the red area inside the switch is visible, the latch is not properly closed
or locked.
FZ-VZSUT11
FZ-VZSUT11
Operating Instructions - Reference Manual
Getting started
.
15