Installing And Removing The Battery - Panasonic FZ-L1 Series Operating Instructions Manual

Getting started

Installing and removing the battery

•
If the cover latch is closed, open it (page 13).
Installing the battery
1.
Insert the tabs at the battery's terminal side into the notches of the unit (
into place (
2.
Press down firmly on the outside edges of the battery to seal it closed.
3.
Close the cover latch (
•
If the gap above the latch or the red area inside the switch is visible, the latch is not properly closed
or locked.
IMPORTANT
•
Observe the following to ensure the waterproof and dustproof performance of the unit.
–
When installing the battery, make sure there is no debris lodged in the gasket of the battery and
the unit.
–
Make sure the gasket of the unit is not damaged, deformed, or peeled off.
–
Always make sure the battery is securely installed and locked.
12 Operating Instructions - Reference Manual
).
) and lock it ( ) by sliding the switch (circled in the illustration) toward
), and then lower the battery
.