Table of Contents
Advertisement
In the dialog box, there are three options - Cooling, heating and heat recovery. For water pump circulation, select
corresponding options as needed, and then click OK
you can click EXIT
.
ON or OFF type:
The configuration item in this type has only two options: ON and OFF, therefore you can click the target item
directly, and then the confirmation dialog box will pop up. If click OK, it will turn from ON to OFF or from OFF to ON.
The following are the examples, as shown in Figure 20. Click the item named "Restore the Default Value", and the
dialog box will pop up after you click it.
Digital filling type:
The configuration item in this type needs to fill in numbers, therefore the digital input dialog box will pop up after
clicking on the configuration item in this type. The user can input the reasonable number and then click OK to confirm
the modification. For example, click the item named "Set value for refrigeration backwater temperature", and the
Options Dialog Box will pop up, as shown in the following figure, and then input the appropriate number and click the
OK to confirm the modification.
Cooke Industries - Phone: +64 9 579 2185
Operation description for HMI 7-inch touch screen
Figure 19. Options dialog box
to confirm the option. If you want to change this modification,
Figure 20. Configuration interface
Email: sales@cookeindustries.co.nz
63
Web: www.cookeindustries.co.nz
Advertisement
Table of Contents
