Table of Contents
Advertisement
The installer may also need to supply and/or install the following optional items:-
Door Switch – for energy efficient,
noise friendly, fan speed control,
Door open – Higher fan speed
Door shut – Lower fan speed
Example Switch only
Gives industry standard fan speed control – see
wiring diagrams and Section "Wiring of air
curtain fan speed" for more information
Service Covers
(optional from Thermoscreens)
The complete Thermoscreens air curtain / Mitsubishi Electric heat pump system, to provide a
heat pump air curtain over a doorway, including wiring, fridge pipework, etc. is to be installed
only by an approved Mitsubishi Electric refrigeration contractor.
IMPORTANT
This Heat Pump Air Curtain is intended only for use with a Mitsubishi Electric Mr Slim
Outdoor Unit, for use on R410A.
These instructions must be read in conjunction with the Mitsubishi Electric Mr Slim
Outdoor Unit instructions.
(All documentation supplied with each unit should be stored and kept for future reference.)
For your records:
Date of Purchase...................................
Place of Purchase..................................
Serial Number.......................................
For warranty purposes proof of purchase is necessary so please keep a copy of your invoice.
T9901105-1-1 UK
Condensate Pump – self priming with
cooling mode detection, alarm
system and pump overrun
If Air Curtain is to be operated in COOL mode
and gravity drain cannot be used – see text
on Page 6 & 7 for more information
Page 9 of 42
Advertisement
Table of Contents
