Fortnightly Cleaning - Mitsubishi Electric thermoscreens HX2-S/M 1000 DXE Installation, Operation & Maintenance Instructions Manual

Heat pump range air curtains
Table of Contents

Advertisement

Vacuum Clean the Air Filters
(Every 2 weeks, or when the Filter Dirty Indicator shows PERMANENT RED)
IF the Filter Dirty Indicator shows PERMANENT RED
NB. The filter dirty interval feature on the Mitsubishi Electric remote controller is not
available.
T9901105-1-1 UK
SERVICING THE AIR CURTAIN
With the air curtain switched OFF,
slide open the access panels
underneath the air curtain.
The filter dirty indicator can be
seen inside the Left Hand end
Release the quarter-turn fasteners.
Remove the air filters from
Clean the air filters with a vacuum cleaner. This is important to
minimise the build-up of dust and lint on the air filters which will
affect the performance of the air curtain. This is a simple
service task that can be carried out by the Cleaner or Janitor
every 2 weeks or when the Filter Dirty Indicator shows
permanent red. Replace air filters.
Reset the Filter Dirty Indicator after cleaning by a
quick press of the Reset Button.
of the air curtain.
the air curtain.
Page 36 of 42

Advertisement

Table of Contents
loading

Table of Contents