Hunter Original Installation Manual page 3

We recommend that you pull everything out of the box and lay it out. We have grouped
the drawn components below with the hardware you'll need for those parts. The screws
below are drawn to scale to make it easier to identify what piece of hardware is needed
to install each component.
Installing Multiple Fans?
If you are installing more than one fan, keep the blades
and blade irons in sets as they were shipped.
3.5" Lag Screw
bag
For installing the hanger bracket and wiring the fan
x15
Grommet
bag
x5
Blade
For installing the blades
Balancing Kit
bag
Spare Parts
For your convenience,
you may receive extra fasteners.
M3872-01 r040521
Here is what comes in your box:
x2
x3
Wire Nut
x15
bag
Blade Screw
Blade Iron
Pull Chain Extension
Oil Tube
Light Kit Adapter
Hunter Pro Tip:
U-Bracket
x10
bag
Blade Arm Screw
x5
Find a part that is missing or damaged?
Don't take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed
on each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Rubber Bushing
and Pin
Mounting
Bracket
Hanger Pipe
Canopy Assembly
Motor
1.888.830.1326.
1886
2