AEG L8FEC962Q User Manual page 32

32 www.aeg.com
9.1 Installing and configuring
"My AEG"
When connecting the washing machine
to the application, stand near it with your
smart device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install the App "My
AEG" .
3. Make sure you started a Wi-fi
connection in the washing machine.
If not, read the next paragraph
'Configuring the washing machine
wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG" .
5. Follow the instructions on the App
for the washing machine registration
and configuration.
9.2 Configuring the washing
machine wireless connection
1. Press and hold the On/Off button for
a few seconds to activate the
appliance. Wait about 10 seconds
before proceeding with wireless
configuration.
2. Press and hold the
buttons for a few seconds
simultaneously until a 'click' sounds.
Release the buttons.
the display for 5 seconds and the
indicator
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
and the
appears on
starts blinking.
3. After about 45 seconds,
Point) appears on the display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
4. Configure the "My AEG" app on
your smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
5. If the connectivity is configured,
when the programme information
screen returns, the indicator
the display.
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator
blinking the connection is
ready.
To switch the wireless connection off,
press and hold the
buttons for a few seconds simultaneously
until the first acoustic signal:
appears on the display for 5 seconds.
(Access
is on
stops
and the