Before First Use; The Autodose Technology (Autodosing) - AEG L8FEC962Q User Manual

20 www.aeg.com
Indicators for options downloadable via App only

6. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

7. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.
Extra Silent indicator.
Pré-lav. indicator.
Lav.Intenso indicator.
AutoDose liquid detergent tank indicator. When it lights, appliance au-
tomatically doses the detergent.
This indicator appears beside
AutoDose softener tank indicator. When it lights, appliance automatical-
ly doses the softener.
AutoDose status indicator. It lights when AutoDose function for additives
is disable.
Linked mode indicator. It lights when both AutoDose tanks are linked
and filled with the same detergent. AutoDose function for softener is
disable: the indicator
detergent tank indicators
These indicators will appear next to
creasing the automatic detergent or softener dosage.
when Lav.Intenso option is set.
disappears and the display shows two liquid
.
and
3. Make sure to fill the AutoDose tanks
with liquid detergent
softener . Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
7.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
when increasing or de-
and fabric