Table of Contents
Advertisement
CAUTION!
The tanks refill must be
carries out with the same
brand and type of
detergent/fabric softener/
additive used before,
otherwise clean the tanks
before refilling.
7.7 Switching from AutoDose
to manual dosing
It is possible to disable AutoDose
function for one or both tanks by
pressing related button symbol.
Example:
• To switch Fabric Softener tank off,
press the
button until the display
shows OFF.
• If you need to use different detergent
than ones present in AutoDose tanks,
you could switch Detergent tank off
by pressing
button until the
display shows OFF.
7.8 Deactivating the AutoDose
If you prefer to use the compartments for
manual filling as default choice, you can
deactivated the AutoDose tanks
completely.
Once you have entered the AutoDose
configuration mode by pressing Temp.
°C and the Centrif. buttons:
1. Tap on the
button or
until display shows
AutoDose is excluded completely for
related tank or both.
2. After about 10 seconds the display
returns to the programme
information screen.
7.9 Manual filling the
detergent and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent
and/or other treatments in the manual
compartments.
Do not exceed the
maximum indicated level
(
).
1. Open the detergent dispenser.
2. Put the powder detergent in the
compartment
detergent, refer to "Manual filling
the liquid detergent".
ENGLISH
25
button
: the
. When using liquid
Advertisement
Table of Contents
