Before Requesting Service - Panasonic NN-ST785SPTE Manual

Before Requesting Service

ALL THESE THINGS ARE NORMAL:
The oven causes interference
with my TV.
Steam accumulates on the oven
door and warm air comes from
the oven vents.
I accidentally operate my
microwave oven without any
food in it.
PROBLEM
Oven will not turn on.
Oven will not start cooking.
When the oven is turning on,
there is noise coming from
Glass Tray.
The " " appears in the
Display Window.
The oven stops cooking by
microwave and "H00", "H97"
or "H98" appears in the
Display Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
Some radio, TV, Wi-Fi, cordless telephone, baby monitor, blue tooth or other
wireless equipment interference might occur when you cook with the microwave
oven. This interference is similar to the interference caused by small appliances such
as mixers, vacuums, blow dryers, etc. It does not indicate a problem with your oven.
During cooking, steam and warm air are given off from the food. Most of the steam
and warm air are removed from the oven by the air which circulates in the oven
cavity. However, some steam will condense on cooler surfaces such as the oven
door. This is normal.
Operating the oven empty for a short time will not damage the oven.
However, we do not recommend this to be done.
POSSIBLE CAUSE
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or
blown.
There is a problem with the outlet.
The door is not closed completely.
Start Pad was not pressed after
programming.
Another program has already
been entered into the oven.
The program has not been entered
correctly.
Stop/Reset Pad has been pressed
accidentally.
The roller ring and oven bottom
are dirty.
The Child Safety Lock was activated by
pressing Start Pad 3 times.
This display indicates a problem with the
microwave generation system.
- Eng-19 -
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Close the oven door securely.
Press Start Pad.
Press Stop/Reset Pad to cancel the
previous program and program again.
Program again according to the
Operating Instructions.
Program oven again.
Clean these parts according to care of
your oven (See next page).
Deactivate Lock by pressing Stop/Reset
Pad 3 times.
Please contact the specified service
center.