Step 2: Pen Tablet Installation; Usb Cable Installation - Wacom Cintiq 12 WX DTZ-1200W Installation Manual & Hardware Manual

STEP 2: PEN TABLET INSTALLATION

In this step, Cintiq is installed as a pen tablet.

USB CABLE INSTALLATION

1. First plug the USB cable into the USB connector located on the converter unit.
2. Plug the other end of the cable into an available USB port on your computer or into a USB hub.
Next, install the pen tablet software. See "Software installation" on page 17.
To USB port
USB connector
Computer
Installation
Page 16