Converter Unit - Wacom Cintiq 12 WX DTZ-1200W Installation Manual & Hardware Manual

CONVERTER UNIT

The converter unit provides an interface for all video and data signals passing between the Cintiq
pen display and your computer. The unit also routes input power from the supply adapter to your pen
display.
Power plug
For power input connection to the power supply adapter.
USB-A connector
For USB connection to your computer.
DVI-I video connector
Accepts an incoming DVI or VGA
video signal from your computer.
On Screen Display (OSD) controls
Use these controls to adjust the display settings.
See "Adjusting the display" on page 31.
Pen display cable connector
Connects to the pen display's integrated cable.
DVI/VGA (digital/analog) switch
Set this switch for the video connection you will be using.
For DVI, move switch left (toward the connector).
For VGA, move switch right.
Your new Cintiq
Page 10