Network Settings - Airlink101 AICN1500W User Manual

4.3 Network Settings

The Network menu contains three sub-menus that provide the network settings for the camera, such as
the IP Setting, DDNS Setting, IP Filter, and Wireless Network.
Network >> Network
IP Setting
This item allows you to select the IP address mode and set up the related configuration.
DHCP: The default setting is DHCP and it uses your network's DHCP server. When the camera
starts up, it will be assigned an IP address from the DHCP server automatically. Another option is
to use Static IP, You should use Static IP mode to set a static IP so that the IP address will never
change and you will always know what it is.
Static IP: Select this option to assign the IP address for the camera directly. You can use
SkyIPCam Utility to obtain the related setting values.
IP
Subnet Mask
Default Gateway
Enter the IP address of the camera. The
default setting is 192.168.2.240.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera.
The default setting is 192.168.2.1.