Table of Contents
Advertisement
Network >> Wireless Setting
The camera supports WLAN while you use the wireless network. Select the Enable option to enable this
feature.
The camera supports Wireless feature that can connect to your wireless network. Select the Enable
option to enable this feature.
Network ID (SSID): Keep the default setting of this option to connect the camera to any access point
under the infrastructure network mode. To connect the camera to a specified access point, set a
SSID for the camera to correspond with the access point's ESSID. To connect the camera to an Ad-
Hoc wireless workgroup, set the same wireless channel and SSID to match with the computer's
configuration.
Click Site Survey to display the available wireless networks, so that you can easily connect to one of
the listed wireless networks.
Wireless Mode: Select the type of wireless communication for the camera: Infrastructure or Ad-
Hoc.
Channel: Select the appropriate channel from the list.
Authentication: Select the authentication method to secure the camera from being used by
unauthorized user: Open, Shared-key, WPA-PSK, and WPA2-PSK. The following table explains the
four options:
Open
The default setting of Authentication mode,
which communicates the key across the network.
Shared-key
Allow communication only with other devices
with identical WEP settings.
WPA-PSK/
WPA-PSK/WPA2-PSK is specially designed for
WPA2-PSK
the users who do not have access to network
authentication servers. The user has to manually
enter the starting password in their access point
or gateway, as well as in each PC on the
wireless network.
If you select Open or Shared-key as the Authentication mode, you need to complete the following
settings:
Advertisement
Table of Contents
