Airlink101 AICN1500W User Manual page 27

Wireless n night vision network camera

Hide thumbs Also See for AICN1500W:

Table of Contents

Network >> Wireless >> WPS Setting

The camera supports WPS (WiFi Protected Setup™) feature that allows your camera to connect to the

wireless network easily and safely without manually configuring the wireless security settings.

note that Your AP/Router must support WPS feature as well. If you are not sure, please refer to the

manufacturer's manual of your AP/Router.

Select either PIN or PBC mode to start the WPS session:

Select PIN Mode:

Step 1

Enter the SSID of the AP/Router you wish to connect to, or click Site Survey and select

from the listed wireless networks.

Step 2

Go to the WPS section of your AP/Router's web configuration page, then enter the PIN

Code generated by the camera (in this case, "00639392") into the corresponding field.

Please check your AP/Router's manufacturer's manual for more details.

Select PBC Mode (Recommended):

Step 1

Click on the Connect button on this page or push the WPS button on the backside of the

camera.

Step 2

Push the WPS hardware button on your AP/Router or the WPS software button in the

web configuration page of your AP/Router.

Within 2 minutes, the camera will be wirelessly associated with your AP/Router.

Please

Table of Contents

Skyipcam1500w