Network Settings - Airlink101 AICN747W User Manual

4.3 Network Settings

The Network menu contains three sub-menus that provide the network settings for the camera, such as
the IP Setting, DDNS Setting, IP Filter, and Wireless Network .
Network >> Network
IP Setting
This item allows you to select the IP address mode and set up the related configuration.
- DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it
will be assigned an IP address from the DHCP server automatically. It is recommended that you
NOT use DCHP. You should instead use Static IP mode to set a static IP so that the IP address
will never change and you will always know what it is.
- Static IP: Select this option to assign the IP address for the camera directly. You can use
SkyIPCam Utility to obtain the related setting values.
IP
Subnet Mask
Default Gateway
Primary/
Secondary DNS
Enter the IP address of the camera. The
default setting is 192.168.1.240.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera.
The default setting is 192.168.1.1.
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP. It is usually recommended
- 34 -