Honeywell GENT Vigilon Plus Series Operating Instructions Manual page 15

Multiple fires
Previous
F2
Use the [Previous] or [Next] buttons or with the outer door open you can to scroll the fire events.
The 1st Fire will always appear at top of display. All subsequent fires appear beneath the 1st Fire.
Zones 1
NA
The zone indicators are not applicable for Vigilon Plus Network Node.
Each fire is logged in the Historic Events log, which can be recalled using the menus. See How to view the Historic Events.
To verify an alarm Upon receipt of a fire condition the alarm sounders in the system can be delayed from sounding by using the Verify button.
(If required by This allows time to investigate the cause of the alarm.
site procedures) Note the delayed sounders will operate after the verify period has timed-out.
Press:
www.acornfiresecurity.com
FIRE
Next
F3
The zonal indicators show zones in fire condition. If the panel is configured, the first zone to go into a fire
condition may be indicated by a flashing zone number, all other zones in fire give a steady indication.
Verify
VERIFY
www.acornfiresecurity.com
Vigilon Plus fire alarm system
15