Remington HH-400T-KFA User's Manual & Operating Instructions

Remington HH-400T-KFA User's Manual & Operating Instructions

Advertisement

Quick Links

User's Manual & Operating Instructions
Model Number
HH-400T-KFA
Consumer: Please Read These Instructions And Keep For Your Reference
IMPORTANT: Read and understand all of the directions in this manual before assembling,
starting, or servicing the heater. Improper use of this heater can cause serious injury. Keep this
manual for future reference.
GENERAL HAZARD WARNING:
DANGER
Be sure to comply with the instructions and warnings provided with this heater, or death,
serious bodily injury and property loss, damage from the hazards of fire, explosion, burn,
asphyxiation, and carbon monoxide poisoning can result.
Only persons who can follow and understand these instructions should use or service this
heater. If you need heater information such as an instruction manual, labels, etcetera, contact
the manufacturer.
Not for use in residential living areas or in non-adequately ventilated enclosed
DANGER
spaces.
For outdoor use. Indoor use permitted for: The temporary heating of adequately
ventilated buildings or structures under construction, alteration or repair.
668 Stony Hill Road #302 Yardley, PA 19067 USA Toll Free: (800) 641-6996
Fax: (215) 891-8461 • Web: www.remingtonheater.com • Email: info@pinnacleint.com
© 2014 Pinnacle Products International, Inc.
701000304-14

Advertisement

Table of Contents
loading

Summary of Contents for Remington HH-400T-KFA

  • Page 1 User’s Manual & Operating Instructions Model Number HH-400T-KFA Consumer: Please Read These Instructions And Keep For Your Reference IMPORTANT: Read and understand all of the directions in this manual before assembling, starting, or servicing the heater. Improper use of this heater can cause serious injury. Keep this manual for future reference.
  • Page 2: Table Of Contents

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Safety Information Table of Contents Safety Information ..........2-3 Indicates an im minently hazardous DANGER situation which, if not avoided, WILL Features ..............3 result in death or serious injury.
  • Page 3: Safety Information

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Safety Information (Continued) Never use this heater in living or sleeping areas. NEVER use this heater where flam mable vapors may be NEVER refill the heater’s fuel tank while heater is operating or present.
  • Page 4: Specifications

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Unpacking Check the chart below to be sure that you have all of the parts required to assembly your heater. If you find that any parts are Remove the heater and all of the packaging materials from the missing, call 215-891-8460 for assistance in receiving the miss- shipping carton.
  • Page 5: Assembly

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Assembly Model HH-400T-KFA Wheel Support Frame Wheels and Axle Wheel Caps Front Handle Rear Handle Cord Wraps Screws, Nuts and Washers Flat Washers (S)
  • Page 6: Operation

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Operation THE SAFETY SYSTEM Temperature Limit Control: This heater is equipped with a KEROSENE (1-K) Tempera ture Limit Control designed to turn the heater off should For optimal performance of this heater, it is strongly suggested the internal temperature rise to an unsafe level.
  • Page 7: Ventilation

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Operation (Continued) NOTE: When using diesel fuel in cold ambient temperatures (below 35° F) fuel additives will be required to prevent the diesel fuel from “jelling”.
  • Page 8: Maintenance

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Operation (Continued) Maintenance Never service heater while it is plugged in WARNING or while hot NOTE: USE ORIGINAL EQUIPMENT REPLACEMENT PARTS. Use of third-party or other alternate components will void warranty and may cause unsafe operating conditions.
  • Page 9 NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Maintenance (Continued) PHOTOCELL CLEAN PHOTOCELL ANNUALLY OR AS NEEDED. Nozzle - Remove upper shell. - Remove fan (See fan blades). - Remove photocell from its mounting bracket - Clean photocell lens with cotton swab.
  • Page 10 NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE FUEL FILTER NOTE: Use only original equipment replacement parts. Use of alternate or third party components will void any warranty and CLEAN TWICE PER HEATING SEASON OR AS NEEDED. may cause unsafe operating conditions.
  • Page 11: Wiring Diagrams

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Maintenance (Continued) 3. Allow the heater to attempt ignition for 3-5 seconds, during which time you may hear a loud "grinding" or vibration sound. 4.
  • Page 12 NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Figure 16 – Repair Parts Illustration for Portable Oil-Fired Heater Page 12 ©2014 Pinnacle Products International, Inc. Kerosene Heater User’s Manual...
  • Page 13 NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Repair Parts List for Portable Oil-Fired Heater Description Qty. Description Qty. Upper Shell — Wheel Cap 70-041-1111 Chamber Assembly — Fan Guard 70-016-0300 —...
  • Page 14 NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Troubleshooting Guide 1. See Pump Pressure Adjustment, Page 10 Heater ignites but Main PCB 1. Wrong pump pressure assembly 2. See Fuel Filter, Page 10 2.
  • Page 15: Troubleshooting

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE Troubleshooting Guide (Continued) Sensor disconnected A. Check limit control thermostat B. Check sensor connection Temperature limit safety device is Wait until unit cools down overheated 1.
  • Page 16: Warranty

    NEVER LEAVE HEATER Kerosene UNATTENDED WHILE BURN- ING OR WHILE CONNECTED Forced Air Heaters TO A POWER SOURCE LIMITED WARRANTY AFTER THE PERIOD OF THE ONE (1) YEAR EXPRESS WARRANTY EXPIRES, Pinnacle Products International, Pinnacle Products International, Inc. warrants this Inc.

Table of Contents