Service Information; Jumper Setting On Hard Disk Drive - Sony PCV-LX810 Service Manual

5-1.

JUMPER SETTING ON HARD DISK DRIVE

The hard disk drive of service parts can be used without changing factory jumper setting, when it was replaced for service.
Model
PCV-LX810
Model
PCV-LX910
SECTION 5

SERVICE INFORMATION

Part No. Maker
A-8049-262-A Seagate
Part No. Maker
A-8049-328-A Quantum
Code
ST340823A
7 1
8 2
Configuration Jumper Setting
Limit capacity to 32 Gbytes
Master or single drive
Drive is a slave
Master with a non-ATA
compatible slave
Enable cable select
Code
AS60A011
KEY DS CS PK
Master/Slave selection
Jumper setting
Cable Select for Master/Slave
(Factory default)
Master
Slave (Jumper Packing Position
5-1
Capacity
memo.
(formatted)
40 GB 1-772-938-13
Factory setting
Capacity
memo.
(formatted)
60 GB 179609111
Factory setting
Confidential
PCV-LX810/LX910 (UC)