Install Main Cable And Pulley - Precor Pacific FITNESS Solana Assembly And Maintenance Manual

Solana Assembly and Maintenance Guide

8. Install Main Cable and Pulley

A. Insert the Selector Stem in the Weight Stack with
the threaded hole at the top. Hold the Selector
Stem approximately one foot above the Top Cap
Weight.
B. Insert the Weight Pin to suspend the Selector
Stem.
C. Place the loop end of the Weight Pin Lanyard into
the U end of the Main Cable (#43746-101). Align
the U end of the Main Cable, the top of the Selector
Stem, and the Top Cap Weight. Attach using
one 1½-inch socket cap bolt
Wrench tighten.
D. Remove the Weight Pin and lower the Top Cap
Weight on the Weight Stack. Reinsert the Weight
Pin into the Weight Stack.
Step 8. Install Main Cable and Pulley
Main Cable
U bracket
Top Cap Weight
A
Selector Stem
Weight Stack
D
Weight Pin
1 2 3
C
1 - 1½" socket cap bolt
B
Weight Pin
4 5 6
page 23