Running The Scsiselect Utility; Scsiselect Utility Options; Configure/View Host Adapter Settings Menu - Acer Altos 600 Series User Manual

Running the SCSISelect Utility

To start SCSISelect, press Ctrl+A when the following is displayed during power-
up or reset:

    
  
This message appears after BIOS and POST information displays, and after the
banner listing the Adaptec AIC-7899 version number.

SCSISelect Utility Options

When the SCSISelect utility detects the AIC 7899 SCSI controller in your
computer, it displays an Options menu.
In the Options menu, use the
the SCSISelect utility. Press Esc at any time to return to the previous menu.
You can press F5 to toggle the display between color and monochrome
modes. (This feature may not work on all monitors.)

Configure/View Host Adapter Settings Menu

The Configure/View Host Adapter Settings menu lists three settings under SCSI
Bus Interface Definitions and three additional options. Advanced users can access
Boot Device Options, SCSI Device Configuration, and Advanced Configuration
Options.
Use the cursor ( ) to move to your selection. Press Enter to display a pop-up
menu of choices or to make selections. Press Esc at any time to return to the
previous menu.
and keys and the Enter key to make selections in
93