Table of Contents
Advertisement
3.2.2
SCSI Disk Utilities
When you select SCSI Disk Utilities from the Options menu the SCSISelect utility
scans the SCSI bus and lists all SCSI devices installed on the SCSI bus. You will see
a screen similar to the figure below. You can easily determine from this screen
which SCSI ID is assigned to each device on the SCSI bus.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 3-10 SCSI Disk Utilities Screen for AHA-3950U2B
When you highlight a disk device by moving to it with the cursor keys and press
Enter, a small menu window appears. You then select Format Disk or Verify
Media from this menu.
Use the cursor keys (
up menu with a selection of values. Use the cursor keys (
press Enter to make your selection.
Adaptec AHA-3950U2B
AHA-3950U2B at Bus:Device 01:06h
Select SCSI Disk and press <Enter>
SCSI ID #0: IBM DNES-39130 LVD
SCSI ID #1: No device
SCSI ID #2: No device
SCSI ID #3: No device
SCSI ID #4: No device
SCSI ID #5: No device
SCSI ID #6: No device
SCSI ID #7: AHA-3950U2B
SCSI ID #8: No device
SCSI ID #9: No device
SCSI ID #10: No device
SCSI ID #11: No device
SCSI ID #12: No device
SCSI ID #13: No device
SCSI ID #14: No device
SCSI ID #15: No device
) to move between options. Press Enter to display a pop-
SCSISelect (TM)
Chapter 3 – SCSISelect Configuration Utility 3-19
Utility
=default)
*
) to select a value, and
Advertisement
Table of Contents
