Table of Contents
Advertisement
2.5.3
Onboard Device Settings
The Onboard Device Settings menu allows you to configure the onboard
communication ports and the onboard devices. Selecting this option from the
Onboard Peripherals menu displays the following screen:
Floppy Disk Controller .............. [Enabled ]
IDE Controller ...................... [Both
PS/2 Mouse Controller ............... [Enabled ]
USB Host Controller ................. [Disabled ]
USB Legacy Mode ................... [--------]
SMBus Interrupt(IRQ9) ............... [Disabled ]
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk controller. The
default setting is Enabled.
IDE Controller
Set this parameter to Primary to enable only the primary IDE controller; Both to
enable both primary and secondary IDE controllers; or Disabled to disable all IDE
controllers. The default setting is Both.
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse controller. The default
setting is Enabled.
Onboard Device Settings
]
Chapter 2 - BIOS Utility 2-19
Advertisement
Table of Contents
