Table of Contents
Advertisement
2.4.2
LS-120 Drive Compatible As
This parameter allows you not only to enable the LS-120 device installed in your
system, but also to specify the function of the device. The setting affects how BIOS
will detect the device. The default setting is Normal.
Possible settings are:
Normal
Drive A
Drive B
Hard Disk BIOS recognizes the LS-120 drive as a hard disk. In this setting,
Although LS-120 options are provided in the
system BIOS, LS-120 drives are neither
qualified nor supported in this server.
In this setting, BIOS does not support the LS-120 drive. The drive
needs the LS-120 device driver to operate.
BIOS recognizes the LS-120 drive as drive A. If a standard
diskette drive A exists, BIOS automatically identifies it as drive B.
If a standard diskette drive B exists, it automatically becomes
inaccessible. If two LS-120 drives exist, BIOS recognizes them as
drive A and drive B, respectively.
BIOS recognizes the LS-120 drive as drive B. If a standard diskette
drive B exists, it becomes inaccessible.
format the LS-120 drive as any other hard disk and assign it a
drive letter C, D, E, and so on. See the documentation that came
with the LS-120 drive for more information.
Chapter 2 - BIOS Utility 2-11
Advertisement
Table of Contents
