Power Supply Specification
1. Input Power Specification
Specification
Input Voltage Range
Frequency Range
Power Consumption
Regulation Efficiency
2. Output Power Requirement
The power supply can provide DC output as below:
NO.
Voltage
1
+12 V
3. Lamp Power specifications
Specification
Applicable Lamp
Starting pulse from
Ignitor
The unit shall meet all the operating requirements with the range 90
~ 264 VAC
The unit shall meet all the operating requirements with an input
frequency range :
X1130/X1230/X1230S/X1235 : 50 Hz ~ 60 Hz
X1230K : 47 Hz ~ 63 Hz
Normal operation:
X1130/X1230/X1230S/X1230K :
X1235 : 285W (Max)
standby mode: <
80 % (typical) measuring at 115Vac and full load
Regulation
Load Current Range
0.15 A ~ 2.5 A
±10 %
Description
X1130/X1230/X1230S/X1230K
X1235 : Philips 210W, AC operation. Applicable ballast = 200W.
Description
280W (Max)
5W(for X1235/X1230K : loop through is disabled)
: Philips 189W, AC operation.
14
Ripple & Noise
300 mV