JVC MC-8200LU Service Manual page 7

Removing the Panel
<In normal condition>
Turn the power OFF in standby mode, insert a pin into the emer-
gency hole on the panel, and open the door using the key. Then
remove the screw enabling the panel to be removed by sliding
it to the right.
2.1.3 Removing the Magazine
1. Open the door. (Refer to 2.1.2.)
2-3
Key Cylinder
Panel
Emergency Hole
Removing the Panel
<When trouble occurs>
When trouble occurs with the carrier stopped at the lower sec-
tion, remove the panel while release the lock by pressing down
the lever shown in the diagram.
2. Pull the release lever which locks the magazine toward you.
Release Lever
Panel mounting
screw
Release lock
The magazine is slightly protruded toward the front.
Pin (2 mm dia.)
Panel